TECHNICAL

FAQ

Download

FAQ

Q

When the water in the hot tank is heated to the set temperature, the thermostat contact is disconnected, cutting off the heating and heating indication circuit power, "the heating indicator is off, and the electric heating pipe stops heating."

A

When the temperature drops to the set temperature, the thermostat contacts the connected power circuit, and the electric heating tube is heated, so the temperature of the water is maintained between 85 - 95 ° C.

Q

When using a warm water dispenser, press the heating switch, and the "heated power indicator" will illuminate.

A

At the same time, the power supply is divided into two ways: one way constitutes a heating circuit to make the electric heating tube heated by electricity; The other is the "heating indicator" provides voltage for heating indication.

Q

The "check valve" on the connecting pipe of the hot water gallbladder in the base fails, the hot water flows back to the storage tank, and the hot and cold water are connected together to cause the temperature string.

A

Replace the "check valve".

Q

Water dispenser cold and hot water string temperature

A

Check whether the water purifier float valve is not installed properly. The water in the water tank of the water dispenser is full and covers the hot water vent on the side of the water tank. Hot and cold water are connected together to cause string temperature.

Q

Water leakage from the water dispenser faucet

A

Reason (1): Whether the clasp position of the faucet is tight. Reason (2): Whether the clasp position of the faucet is wringing teeth.
< 12 >